Subsidiaries:
Language:
Website:
Reserved area
product configurator
Case histories
ACS Thermal Vacuum Chamber for the Space Smart Factory project by Thales Alenia Space to be built at Tecnopolo Tiburtino in Rome.
26/03/2024

ACS Thermal Vacuum Chamber HVT240K -170130 GN2 will contribute to the Space Smart Factory project by Thales Alenia Space, to be built at Tecnopolo Tiburtino in Rome.

ACS Thermal Vacuum Chamber HVT240K -170130 GN2 will contribute to the Space Smart Factory project by Thales Alenia Space, to be built at Tecnopolo Tiburtino in Rome.

Fraunhofer IIS/EAS: climatic tests with ACS WZH 16 SP walk-in chamber
15/02/2024

Fraunhofer IIS/EAS in Dresden: Solutions to reduce the energy consumption of heat generators in buildings

The institute uses our walk-in chamber WZH 16 SP for climatic tests to evaluate efficiency losses simulating heat generator operations within a virtual building environment.

A new Thermal Vacuum Chamber for Frentech Aerospace – ACS
01/02/2024

ACS and Frentech Aerospace: a long-term partnership in the testing activity sector has accompanied the brilliant evolution of the Czech company

From the production of aircraft parts and modules to the recent development in the aerospace field, with the design and manufacture of subsystems for satellites and other subsystems for Space industry, constituting 80% approx of Frentech turnover.

UD150 C SR ACS climatic vacuum test chamber for University of Perugia
30/11/2023

ACS chamber for vacuum and solar radiation tests supports research at the University of Perugia

The development of new "smart" materials, with adaptive performances aimed at increasing the energy efficiency of the built environment is one of the main research lines of EAPLAB, the Technical Physics laboratory of the Engineering Department of the University of Perugia.

acs chamber dy110 c for tecnottica consonni
28/07/2023

TECNOTTICA CONSONNI uses an ACS chamber for its quality control tests of Optical Components and Coating in Aerospace applications

The DY110 C chamber allows to test the Surface Treatment, its characteristics and its behaviour during use, to verify its resistance to stress factors such as extreme variations in Temperature and Humidity.

ACS chamber DY110 for the University of Duisburg-Essen
27/06/2023

DY110 ACS chamber for a Research study on recyclable film composites

In 2023 the Institute for Product Engineering of the University of Duisburg-Essen, Germany, started using our climatic chamber to test plastic samples aiming at improving their sustainability.

Flower® climatic chamber with energy savings for Mogatec
31/05/2023

ACS guarantees the best innovative design of Mogatec GmbH gardening tools

Mogatec laboratory makes use of an ACS T&RH test chamber based on Flower® patented technology, allowing to reduce energy consumption and minimize environmental impacts.

Large ACS climatic chamber for vibration test on batteries
22/03/2023

Large ACS vibration test chamber for Applus+ Test centre in UK

The new UK laboratory is dedicated to battery testing for ECE R100 homologation and UN DOT 38.3 compliance. There are few systems in Europe that can test battery packs as huge as this one.

BUILDWISE Belgium and ACS transmittance test chamber.
06/03/2023

BUILDWISE Belgium and ACS cutting-edge technology for the building sector

The ACS transmittance test chamber supports Buildwise’s core activity of improving quality & reliability in the sector, where another key factor to be achieved today is sustainability.

ACS Calorimeter for thermal transmittance tests to assess the performance of building envelopes
01/02/2023

ACS and the quality of our homes: La Rochelle University studies on building envelopes

The Laboratory of Engineering Sciences for the Environment is using our calorimeter for thermal transmittance tests to assess the performance of building envelopes in a controlled environment, both for construction and renovation of buildings.

Severe Stress Screening with DM1000 TC 20 ESS ACS chamber at CONTINENTAL Automotive France
11/01/2023

Severe Stress Screening with DM1000 TC 20 ESS ACS chamber at CONTINENTAL Automotive France

Proud to have another big customer appreciating our efficiency, competence and technical know-how.

The Medium Scale Vacuum Chamber by Angelantoni Test Technologies for C.I.R.A.
09/12/2022

ACS space simulator for testing electric space thrusters made by the C.I.R.A.

Since 2020, the ACS space simulator, called the MSVC (Medium Scale Vacuum Chamber), is part of the Italian Aerospace Research Center (C.I.R.A.) Space Propulsion Laboratory in Capua (CE).

 ElringKlinger AG rely on ACS chambers for battery testing
05/10/2022

ElringKlinger AG Quality Lab rely on ACS experience and flexibility for battery test equipment

To accelerate battery development for electric vehicles, ElringKlinger AG works with equipment from ACS to simulate environmental parameters.

ACS collaborates with Data Patterns since 2007 for Environmental Stress Screening tests (ESS)
07/09/2022

Proud to be suppliers of Data Patterns, Defence and Aerospace Electronic Solutions provider in India

ACS collaboration with Data Patterns dates back to 2007 when they first decided to use one of our chamber for Environmental Stress Screening tests.

ACS a reliable partner for Johnson Electric. Climatic and thermostatic chambers for quality testing.
01/08/2022

ACS: a reliable partner who knows how to convince Johnson Electric about product testing

Discovery My test chambers sustainability features and Easy Integration S/W Tools among the key factors influencing Johnson Electric choice for the right partner to deliver the best quality test results and products to their customers.

ACS environmental test chambers for MATE, the Laboratory for experimental and accreditation tests
28/06/2022

ACS and a decade of collaboration with MATE, the Laboratory for experimental and accreditation tests

MATE, a company in the ART S.p.A. Group, is a test laboratory operating in the Automotive, Aerospace, Aviation & Defence, Biomedical, E-mobility, and Rail and Naval sectors. It has been using chambers supplied by Angelantoni Test Technologies for environmental and corrosion tests for over 10 years.

The special Battery Test bench combined with shaker and power supplies by ACS for CSI
24/05/2022

ACS and CSI – part of IMQ Group - for a special Battery Test bench combined with shaker and power supplies

For this new test bench dedicated to thermal-vibrational fatigue and charge/discharge tests on automotive batteries, CSI has chosen a 18 mc walk-in ACS climatic chamber with a vibrating table interface.

Cetex Institute chooses ACS Flower® chamber for textile testing
03/05/2022

ACS and the R&D activities in the textile industry: the CETEX case

With Flower® chamber, the institute carries out research for the development of technical fabrics, textile-based materials and semi-finished products

Merlo chooses ACS climatic chamber for its roller bench tests
05/04/2022

MERLO chooses ACS for cutting-edge “made in Italy” solutions with the highest safety standards and respect for the environment

MERLO’s choice to work with ACS stems from the sharing of similar corporate values and vision: both groups were founded in Italy and make innovation and excellence their guiding values.

ACS environmental test chambers for accelerated lifetime testing
08/02/2022

Faster lifetime analyses by combining ACS environmental simulation chambers with advanced imaging techniques

For environmental simulation, the Vorarlberg University of Applied Sciences relies on devices from Angelantoni Test Technologies, to perform accelerated lifetime testing and other reliability tests.

A walk-in thermal chamber from Angelantoni Test Technologies and a roller bench Bosch e-bikes testing
20/01/2022

Chassis-dyno tests on an environment controlled by ACS chamber to qualify Pedelecs at Bosch

Bosch eBike Systems tests its Ebikes and Pedelecs through a roller dynamometer combined with an ACS thermostatic chamber.

ACS and ABB for technologically advanced, accurate and reliable measurements
30/11/2021

ACS and the historic ABB: a long, successful collaboration

Technologically advanced, accurate and reliable measurements, certified according to International Standards.

Walk-in chamber for emission testing
10/11/2021

ACS complete vehicle test chamber at ICAT, primary Validation & Testing Center in India

One of the largest Climatic Dyno Chambers installed in India, ACS emission test chamber is also equipped with solar light and wind simulation systems.

ACS environmental test chambers for Gestlabs
23/09/2021

Large ACS thermal shock test chamber for GESTLabs laboratory

"A new CST1000/2T chamber has been introduced to perform thermal shock tests on electronic components and products for high tech industries, such as automotive, aerospace and industrial machinery."

ACS test chambers support VHIT BOSCH in the green conversion of automotive components
06/09/2021

ACS supports VHIT BOSCH in the green conversion of automotive components

"Fundamental in the development phases are the tests performed using climatic chambers associated with functional control and reliability devices."

ACS small Thermal Vacuum Chambers for nanosatellites testing for the European Space Agency
04/08/2021

A small Thermal Vacuum Chamber for tests on microsatellites: ESA and the “Fly your Satellite!” initiative

From the UK to Spain, the best European universities make use of ACS experience for important test activities carried out in Belgium at ESA's Education Training Center.

ACS Thermal Vacuum Chamber for the National Space Organization NSPO in Taiwan
16/07/2021

NSPO Thermal Vacuum Chamber: a new record for ACS

After building one of the largest Thermal Vacuum Chambers in Europe last year, destined for the British Rutherford Appleton Laboratory, Angelantoni Test Technologies has scored a new record order.

MTA chooses ACS climatic chambers
06/07/2021

MTA chooses ACS products for their test laboratory in Morocco

"We have decided to confirm a partnership that has always guaranteed us highly reliable systems. "

Tec Eurolab carries out thermal shock tests with ACS chambers
16/06/2021

TEC Eurolab and the Engineering Testing: thermal shock tests for the Aerospace sector

TEC Eurolab laboratories work with companies to improve production processes and the quality of components.

ACS big Thermal Vacuum Chamber for TAI
25/05/2021

ACS simulation of the environmental conditions of satellite’s entry into orbit: the TAI case

One of the largest space simulators in the world, designed and built by ACS for Turkish Aerospace Industries (TAI).

University of Piacenza uses ACS test chambers for the biomonitoring with bees
20/05/2021

ACS and the University of Piacenza together for the biomonitoring with bees

Bees as bio-indicators to minimize particulate emissions and the impact of dust pollutants on the environment.

ACS Thermal Vacuum Chamber for TNO
07/05/2021

ACS collaborates with TNO to create competitive and sustainable innovations

ACS is supplying TNO, the Netherlands Organisation for applied scientific research, with a Thermal Vacuum Chamber for the calibration of space or pseudo-space instruments at flight representative environmental conditions.

ACS climatic test benches for the lithium-ion modules and high-voltage batteries for Voltavision
05/05/2021

ACS supplied the innovative VOLTAVISION test laboratory with most of their climate test benches for the lithium-ion modules and high-voltage batteries

ACS supplied most of the climate test benches for the lithium-ion modules and high-voltage batteries for Voltavision.

ACS collaborates with Wamblee for environmental testing in the maritime sector
27/04/2021

ACS and the Search and Rescue of persons in distress in the Maritime and Aeronautical Field: the WamBlee case

ACS is a partner of WamBlee to perform the tests required by the most stringent Maritime and Aeronautical standards with precision and repeatability.

Angelantoni Test Technologies has supplied YARZ plant with two Thermal Vacuum Chambers
19/04/2021

ACS Thermal Vacuum Chambers at Yaroslavl Radio Plant Testing Laboratory

Yaroslavl Radio Plant, leader in Russia's radio manufacturing sector and specialized in communication equipment, has recently installed  two ACS Thermal Vacuum Chambers (TVC) for testing spacecraft payload modules in their Laboratories.

Monitoring of environmental risks thanks to ACS climatic chambers
08/04/2021

ACS contribution to the monitoring of environmental risks due to natural events

CAE, a leading Italian company in this sector, is using an ACS chamber for accelerated tests in order to guarantee measurement instruments with maximum robustness and reliability over time.

ACS and the environmental testing to preserve viticultural agroecosystems
03/12/2020

ACS contributes to the defense of the viticultural agroecosystems from the Asian bug

Dr. Ilaria Negri of the Catholic University of Piacenza illustrates the support of simulated environmental tests for studies on climate change and its consequences on biodiversity

Angelantoni Test Technologies provided Proventia with air handling system for their climatic chambers for battery testing
22/10/2020

ACS works with Proventia in Finland

ACS contributed to the innovative design of the Proventia Electric Vehicle Battery Test Laboratory, supplying the air handling system for their climatic chambers for battery testing.

ACS large Galileo Thermal Vacuum Chamber for PRISMA satellite
22/10/2020

PRISMA satellite from tonight is in orbit around the Earth: ACS contribution to the mission

Angelantoni Test Technologies is proud to have contributed to the mission of PRISMA, a satellite launched to study the Earth using spectroscopic techniques, entirely designed and built in Italy for the Italian Space Agency.

ACS vacuum technology for ITER project
22/10/2020

ITER

Thanks to the considerable skills acquired in the field of vacuum technology, Angelantoni Test Technologies contributes to the ITER nuclear fusion project.

22/10/2020

ACS works with its customers on the innovation process: the case of SILA

The Sila Group produces manual, automatic and electronic gearbox controls for the mobility industry. It subjects them to various types of simulated environmental tests, both for product reliability tests and in R&D programs aimed at anticipating the needs of its customers.

22/10/2020

ACS space simulator for ESA - European Space Agency

Discover the project developed by ACS for the European Space Agency, whose European Space Research and Technology Center (ESTEC)  is the reference center for satellite testing in Europe!