Discovery My chambers with CO2 cooling system

The new T and RH chambers with CO2 cooling technology are a revolutionary product that combines innovation, efficiency, sustainability and safety. Compared to the -40°C versions with F-GAS, ACS chambers with CO2 cooling offer numerous advantages to the customer, first and foremost in terms of ENERGY EFFICIENCY: consumption is reduced by an average of 30% on the most frequent test cycles (i.e. IEC60068-2-30).

Lower temperatures: chambers reach -50°C.
Greater cooling efficiency: they are faster below -20°C
Quiet environment: noise levels are extremely low.
Guaranteed safety: there are no flammable gases inside.
Interchangeability: the chambers are identical in size to previous F-GAS versions and can be used under the same laboratory conditions.
Operational and maintenance advantages.

The switch to CO2 (R744) in cooling systems has also represented a significant advancement in ACS refrigeration technology.

Unlike conventional systems using R449A - which lose most of their cooling capacity at temperatures below -25°C and reach a minimum temperature of only -40°C - the CO2 cooling unit configuration effectively cools down to -50°C, maintaining a higher cooling capacity even at the minimum temperatures required for automotive testing.

In addition, these systems operate more quietly than conventional systems, improving comfort in noise-sensitive environments.

Finally, CO2 cooling systems eliminate the need for regular leak checks, making maintenance much easier.

DM CO2 TRC chambers combine technological challenges and sustainability in a single product and represent a significant leap forward in the field of simulated environmental testing, through which Angelantoni Test Technologies continues to demonstrate its commitment to innovation and sustainability, leading the industry towards a greener future.

Inspection window
CO2 refrigerant
Internal light
Wheels and feet

Download the general DM catalogue to see the full standard configuration.

Additional portholes
UV lamp: For aging tests on painted surfaces, plastics, rubber, etc.
No break power unit for PLC
Stainless steel internal shelves
Notched porthole
MyAngel24™: the Interactive Support System

Download the catalogue to see the complete list of accessories.

PLC control system and Weazy™ user interface, chamber Supervision and Management software operating on the on-board display (10’’).

Additionally, a wired connection mode is available by connecting the camera to the customer's LAN network for remote access.

Main features:

Storage of acquired measures
Storing cycles up to 370 segments and delaying their execution.
Upload, edit, export, and delete already existing cycles.
Data and cycles info export on memory drive
Storage of alarms and events occurred during chamber operation.
Visualization and graphical analysis of chamber measures and stored recordings.
High configurability of chamber parameters.
Possibility to send notification emails, only with the MyAngel24™ option