Air to Air Thermal Shock Chambers
Climatic chambers for thermal shock tests are used to subject the specimen to strong shocks by passing it suddenly and repeatedly from a hot temperature zone to a cold one. The specimen can cool or heat at different rates at different points, depending on the material. If exposure to repeated cycles cause large expansions and contractions in volume, the material could undergo strong mechanical stresses and sometimes break.
The traditional approach: two temperature methods, specimen moving with the basket
CST models - Vertical (130 and 320 l) or horizontal (500 and 1000 l) chambers with 2 compartments corresponding to 2 different temperature levels. The 130 l model, named “spinner”, is supplied with a motorized system connected by a screw rod for the transfer of the specimen between the hot and cold compartments. The CST130/2T “spinner” has been completely redesigned based on the Discovery My model, thus obtaining an improvement of performances and a significant reduction of consumption. It is equipped with MyKratos™ control system and with the new 10 inches on board display.
An alternative approach: two temperature methods, specimen fixed in its position
CST "flapper" models - These chambers (130 and 320 l) have a design that can dramatically improve the space crowded situation of many testing laboratories, as the specimen is fixed in its position and the chamber is connected alternatively to hot and cold compartments.
CST320 – 500 – 1000/2T
- Inspection window (hot chamber)
- 2 portholes
- Basket delayed start system
- RS232 interface
CST130/2T “Spinner”
- Inspection window (hot chamber)
- 2 portholes
- 1 shelf
- RS232 interface
CST130 – 320 S “Flapper”
- Inspection window
- Ethernet port
- Emergency stop button
Download the catalogue to see the full standard configuration.
- 4 analog inputs
- UPS for the PLC
- Winkratos software for remote multi-chamber management
Download the catalogue to see the complete list of accessories.
The KeyKratos Plus management software is embedded in the machine in built-in and completely dedicated hardware, which allows the control and management of the chamber functions. The chamber can be accessed remotely to take advantage of the advanced functions (such as the visual creation of thermoclimatic profiles, recordings management and graph analysis) using the WinKratos software that can be installed on a company PC.
The MyKratos™ software is available instead for the CST130/2T “Spinner”; it is also embedded in the machine in built-in and completely dedicated hardware and can be accessed from a PC via web browser or via the free app developed for tablets and smartphones. MyKratos™ allows multiuser and multilevel connections, even from different devices.
Software drivers can be provided on request; they allow to manage the chamber directly from applications created by the customer.
“Air-to-Air” Thermal Shock Test Chambers | |
| MOVING SPECIMEN | STATIONARY SPECIMEN |
CST130/2T "Spinner" CST320 2T | CST130 S “Flapper” CST320 S “Flapper” |
| CST500 2T CST1000 2T | |
- Office No. 9A, 3rd Floor, Tower B, Stellar IT Park, C-25, Sector 62, Noida - 201309 Uttar Pradesh
- Tel +91 120 4230 043